Brightwell Aquatics Phosphate-r Regenerable Phosphate-Adsorption Resin for All Marine Fish & Reef Aquaria 250ml

2677

  • Next-generation regenerable phosphate adsorption resin effective in marine aquaria; will also remove silicates.
  • Far more effective than activated alumina and granular ferric products.
  • Will not negatively impact water quality nor release phosphate or silicate once exhausted;
    will not break up or disintegrate like ferric medias, and contains no aluminum to dissolve in
    aquaria and harm inhabitants.
  • Synthetic polymer resin beads provide for durability and excellent flow characteristics;
    may be employed in fluiduzed-bed, canister, or passive filtration.
  • Regenerable up to five times, dramatically increasing cost effectiveness.
  • For complete information, click the ‘Technical’ button at the top right.

1 in stock

Description

Brightwell Aquatics Phosphate-r Regenerable | Aquanature Online

Basic: Prior to first use, rinse resin under a stream of purified water. For initial application on aquarium, use 1 ml of PhosphātR per 1 US-gallon of water in system and monitor phosphate concentration during usage. Subsequent application of resin may be at the rate of 2 ml per 1 US-gallon.

Advanced: Prior to first use, rinse resin under a stream of purified water. To a point, effectiveness of resin is directly related to the reaction time it has with aquarium water; the longer the reaction time, the more effectively it will remove phosphate and silicate. Once phosphate concentration (”[PO43-]”) has not changed for a period of 4 – 6 hours, remove and regenerate resin, then reapply if necessary.

In all cases, the use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will prolong effectiveness. Fluidized-bed filtration (recommended): follow instructions of filter manufacturer for optimal volume of media to use in reaction chamber; start at a low flow rate and adjust to keep media in a steady “boil” within lower 2/3 of chamber; flow rate should not be such that resin is ejected into aquarium.

Canister filtration: Load resin into filter cartridge as directed by filter manufacturer; leave resin in place until [PO43-] reaches desired level or remains unchanged, as directed above. Slowing the flow of water through the filter may be required to obtain maximum effectiveness of resin.

Passive filtration: Place resin loosely in a 150µm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the resin beads and increases effectivness of this method.
Regenerate PhosphātR with Brightwell Aquatics RegenerātPHOR

Additional information

Weight 1 kg
Brand

Brightwell

Brands

brightwell

Reviews

There are no reviews yet.

Be the first to review “Brightwell Aquatics Phosphate-r Regenerable Phosphate-Adsorption Resin for All Marine Fish & Reef Aquaria 250ml”

Your email address will not be published. Required fields are marked *