Chaning Three-in-one Multi-Function Submersible Pump CN-S350

915

Features:

●Using reinforced ABS raw materials;

●Low noise, durable and reliable;

●The suction cup is suitable for installation in any fish tank:

●Stable water circulation, strengthen aeration and water filtration.

Out of stock

Description

The name of the fish tank submersible pump should be a kind of water pump, but we also knowThere are many forms of pumps from Zhongshan submersible pump manufacturers , such as three-in-one pumps and variable frequency pumps. An air pump is then used for oxygenation, so is the aquarium submersible pump also used to stabilize the water at the bottom of the aquarium?

The fish tank submersible pump is usually set in the fish tank to exchange the water flow as a filter device. The function is to lift the water in the fish tank into the filter tank, then through various areas of the filter tank, and then return to the fish tank for circulation.

When a submersible pump is used as a filter, the flow rate should be 3-5 times the total volume of the tank. For an aquarium with a capacity of 100 liters, choose a submersible pump with a flow rate of 300 liters/hour. It is also necessary to protect the suction port and set up a larger mesh isolation port to prevent the fish from being sucked.

So, how should the fish tank submersible pump be used? Take a submersible pump for example. Before using the pump, the user must first check whether the rated voltage on the pump nameplate is consistent with the actual voltage used. The power cord of the pump cannot be replaced. Do not use if the power cord is damaged during use. When installing or dismantling and cleaning the water pump, you must first unplug and cut off the power supply to ensure safety.

The filter basket must be cleaned frequently during use to ensure normal anhydrous and good filtration effect. Since it is a submersible pump, it must be immersed in water to work, and the pump cannot be idling outside of sleep to avoid damaging the pump body.

In addition, friction sound is generated due to the contact between the shaft and the pump body. The fish tank submersible pump also occasionally produces noise during use. Usually, when the rotor of a water pump is placed horizontally, its rotor is supported by magnetism. The bottom of the pump body rests on the shaft to prevent the rotor from retreating due to the reaction force of the water flow. Therefore, friction between the shaft and the pump body is inevitable. Make noise. The rotor is usually useless after the shaft is ground, usually about a year.

It could also be the sound of water and the rubbing of runners. As long as this is a turbo centrifugal pump, there is theoretically no way to avoid it. However, the design curvature and surface finish of the runner will directly affect the magnitude of the friction sound.

Therefore, when choosing a fish tank submersible pump, a low noise or silent submersible pump will be the choice for home farming. In this regard, submersible pumps are safe and ultra-quiet, and also meet the requirements.

 

Product parameters:

MODEL CN-S150 CN-S250 CN-S350 CN-S450
WATT 15W 25W 35W 45W
HMAX 1.2m 1.5m 1.8m 2m
FMAX 1500L/H 2000L/H 2500L/H 3000L/H
VOLTAGE:220-240V FREQUENCY:50/60Hz

Reviews

There are no reviews yet.

Be the first to review “Chaning Three-in-one Multi-Function Submersible Pump CN-S350”

Your email address will not be published. Required fields are marked *